69J3D11 5-421234567894. Install the camshaft caps, and thentighten the bolts to the specified torquesin two stages and in the sequenceshown.5. Install the timing chain tensioners 1, andthen tighten the bolts to the specifiedtorque in the sequence shown.NOTE:• Install the camshaft caps in the proper posi-tion as shown and with the stamped num-bers facing upside down.• Apply engine oil to the camshaft cap boltsbefore installation.6. Install the new gaskets and exhaust cov-ers, and then tighten the bolts to thespecified torques in two stages and in thesequence shown.T R..Camshaft cap bolt:1st: 8 N·m (0.8 kgf·m, 5.8 ft·lb)2nd: 17 N·m (1.7 kgf·m, 12 ft·lb)Timing chain tensioner bolt:12 N·m (1.2 kgf·m, 8.7 ft·lb)T R. .Exhaust cover bolt:1st: 6 N·m (0.6 kgf·m, 4.3 ft·lb)2nd: 12 N·m (1.2 kgf·m, 8.7 ft·lb)Cylinder head
