69J3D11 6-241234567897. Install the O-ring D and pump housingassembly E into the lower case, tightenthe bolts F, and then install the seal Gand cover H.NOTE:• When installing the pump housing, applygrease to the inside of the housing, andthen turn the drive shaft clockwise whilepushing down the pump housing.• Align the cover projection d with the holee in the pump housing.Installing the lower unit1. Set the gearshift to the neutral position atthe lower unit.2. Install the two dowel pins 1 to the lowerunit.3. Install the lower unit to the upper case,and then tighten the bolts 2 to the speci-fied torque.4. Install the trim tab 3 to its original posi-tion, and then tighten the bolt 4 to thespecified torque.S69J6315AALT572Shift rod push arm: 90890-06052T R..Lower case bolts 2:47 N·m (4.7 kgf·m, 34 ft·lb)Trim tab bolt 4:43 N·m (4.3 kgf·m, 31 ft·lb)ÉDrive shaft and lower case (regular rotation model)
