LOWR Lower unit6-23 69J3D112. Install the new gasket 2, outer plate car-tridge 3, and dowel pins 4.3. Install the Woodruff key into the driveshaft.4. Align the groove on the impeller 5 withthe Woodruff key 6, and then install it tothe drive shaft.5. Install the washers 7, wave washer 8,spacer 9, and collar 0 to the drive shaft.NOTE:• The collar and spacer should fit togetherfirmly.• While pulling the drive shaft up, install thecollar with an appropriate tool a that fitsover the drive shaft as shown.6. Install the O-ring A and insert cartridgeB into the pump housing C.NOTE:Align the insert cartridge projections b withthe holes c in the pump housing.S69J6310AA
