69J3D11 7-361234567893. Install the balls 7, manual release spring8, and bracket 9 by installing the bolts0, then tightening them to the specifiedtorque.4. Install the relief valve seal A and ball Binto the gear housing 1 5.5. Install the filters C and gear pump D byinstalling the bolts E, then tighteningthem to the specified torque.6. Install the manual valve F.Assembling the tilt ram1. Install the new dust seal 1, O-rings 2and 3, and backup ring 4 into the tiltcylinder end screw 5.T R..Gear pump bracket bolt 0:7 N·m (0.7 kgf·m, 5.1 ft·lb)T R..Gear pump bolt E:7 N·m (0.7 kgf·m, 5.1 ft·lb)Power trim and tilt unit
