BRKT Bracket unit7-33 69J3D11WARNINGNever look into the tilt cylinder openingbecause the free piston and power trimand tilt fluid may be expelled out force-fully.5. Hold the tilt piston in a vise using thespecial service tool 4 on both sides.6. Remove the tilt ram.7. Hold the cylinder block 6 in a vise usingaluminum plates a on both sides.8. Loosen the trim cylinder end screws 7,and then remove them.9. Remove the trim piston assemblies.10. Drain the power trim and tilt fluid.11. Remove the circlip 8, adapter 9, andspring 0 from the trim piston assem-blies.12. Hold the trim ram A in a vise using alu-minum plates a on both sides.13. Remove the trim piston B.PTT piston vice attachment 4:90890-06572Tilt rod wrench 5: 90890-06569Cylinder-end screw wrench:90890-06544
