Panasonic A230 User Manual

Position and Rotation Adjustment OCR Type A2306 − 106.2 The Various Modes for Position/Rotation Adjustment CheckersSetting the base positionA position and rotation adjuster is a checker that obtains the amount of adjustmentbetween the coordinates (reference point) set at the time the checker is set up, with thecoordinates at the time the checker is executed. A test must be conducted to set thereference point. (If the setting is for a camera image, a new image is captured when thetest is conducted.) The following confirmation message is displayed if you attempt toterminate the setting procedure without conducting a test and setting a base position.If you select Yes, the settings and changed data will be lost. Unless you want toabandon the setup procedure and lose the settings, select No and set the referenceposition.The base position is automatically cleared whenever changes are made to shape, area,or priority setting. When any of these items have been changed, set the base positionand the position and rotation adjuster again.If only a horizontal base checker has been set, the display shows only the value for theX coordinate, and if only a vertical base checker has been set, the display shows onlythe value for the Y coordinate. (For position and rotation adjustment, the angle is fixedand displayed as 0, and for rotation adjustment, the reference angle is displayed.) Theamount of adjustment for a direction which has not been set is fixed and displayed as0.When the base position has been reset, checkers dependent on the adjustment aredisplayed at the newly adjusted positions.If an angle of rotation is applied, the following message is displayed.If you select Yes, dependent checkers are reset at the previous execution position, butat this point they are reset with the angle of inclination disappearing.Select No if you do not want to change the execution positions of dependent checkers.Resetting at the base position is canceled.NotesConditions for changing execution position:When position and rotation adjuster has been deleted:All dependent checkers return to their original settingpositions. Next execution is from the setting position.When a dependent checker with rotation angle adjusted isreset:The dependent checker is reset with angle 0 close to theprevious execution position.