Panasonic A230 User Manual

Inspection Results and OutputOCR Type A23013 − 713.3 Numerical Calculation(4) Maximum/MinimumDisplays the upper and lower limits for the numerical calculation result.You can use the Serial command to set and refer to the maximum and minimumvalues from an externally connected piece of equipment.Refer to 16.10 Referencing and Changing the Maximum and Minimum Limitsfor Numerical calculations for details.(5) ProgrammesDisplays the set calculation programme.A numerical calculation program can be up to 55 characters in length, and up to12 items can be set.Example: BW01 + 50 = 7 characters = 2 items(6) Data BitSets the data length for when you will output numerical calculation results usingparallel output.(7) StartPress A to capture a new image and perform an inspection, outputting parallel andserial signals in accordance with I/O settings.NoteIn screens that display A: Start, external start signals can also beaccepted.