Position and Rotation Adjustment OCR Type A2306 − 146.3 Setting a Position/Rotation Adjustment Checker6. Set the base position.Refer to page 6 − 10 Setting the base positionfor details.[1] POS. ROT. ADJ. Jud:NG1. Select Camera3. Vertical Checker4. Priority No2. Horizontal CheckerGray Edge :Pos. Adj.No. 17. Delete CheckerA:Test B:Image C:Esc.6. Pos. Rot. Adj. Group 05. Base Pos. (−−−−−, −−−−−, −−−−−)Press the A (Test) key to display the current detectioncoordinates and angle.[1] POS. ROT. ADJ. Jud:NG1. Select Camera3. Vertical Checker4. Priority No2. Horizontal CheckerGray Edge :Pos. Adj.No. 17. Delete CheckerA:Test B:Image C:Esc.6. Pos. Rot. Adj. Group 05. Base Pos. (61.3, 38.0, 89.3) Detection coordinatesand angleNotePress the B (Image) key to check the base position using theimage.Press the ENTER key to register the displayed coordinates and angle asthe base position. The adjustment amounts (∆X, ∆Y and ∆θ) are displayedat the top right of the screen.[1] POS. ROT. ADJ. Jud:NG1. Select Camera3. Vertical Checker4. Priority No2. Horizontal CheckerGray Edge :Pos. Adj.No. 17. Delete CheckerA:−−−−−−−− B:Image C:Esc.6. Pos. Rot. Adj. Group 05. Base Pos. (61.3, 38.0, 89.3)Adjustment amounts000.0