Panasonic A230 User Manual
                                                                                                                                                                                                                                                                                                                                                                                         |
Communications (Serial and Parallel) OCR Type A23016 − 5816.11 Computer LinkThe examples in this manual refer to the Panasonic Industrial Devices SUNX Co., Ltd.FP Series PLCs. If you are using one of the other PLCs, refer to this manual and notethe following points.− Refer to the A200/A100 Hardware Manual for details regarding connectionto the PLC RS−232C connector.− Refer to the PLC manufacturers manuals regarding the PLC side parallel connectorallocation.− Refer to the relevant PLC manufacturers manual regarding the commands and registersused for communication.16.11.3 Communication1 Inspection result outputImagecheckerPLCReady OFFImage capturecompleteChecker executionREADY ONReady ONSTARTOutputs the Startsignal (parallel)after confirmingthat Ready is on.Result outputReady ONNumerical calculation ,judgment outputWrites the resultto the specifieddata register.ResponseIf the specified data register number is out of range, the following command is returnedby the PLC. In this case, communication stops, the Error signal is output, and Readygoes on.Response: %EE!6103BCCIf the communication times out, the Error signal is output and Ready goes on.ONONONT1T2OFFOFFOFFT2T1Ready signal /READYError signal /ERRORInspection start signal /STARTT1: START signal width (1ms min.)T2: Response time with respect to the START signal (within 1ms). |
Related manuals for Panasonic A230
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine