Inspection Results and OutputOCR Type A23013 − 913.3 Numerical CalculationOutput control functionUse this when there are calculation result registers (with numerical values and judgmentresults) that you do not want to output using parallel or serial communications.Refer to page 13 − 16, Setting and Canceling Output Control.Example: 1CA01 = X direction distanceCA02 = Y direction distanceCA03 = angle calculated using CA01 and CA02When using several formulas to calculate the final result (anangle in the case above), you can use this function to outputthe final result only.Example: 2XCA01 = X direction distance ← output suppressedXCA02 = Y direction distance ← output suppressedCA03 = angle calculated using CA01 and CA02When output control is set for CA01 and CA02, only the CA03result is externally output.

Panasonic A230 User Manual