Inspection Results and Output OCR Type A23013 − 2413.4 Judgment Output13.4.2 Creating a Judgment ProgrammeIn the judgment condition program example described here, JD01 goes on if theCharacter Verification No. 1 checker judgment result is OK.Procedure:1. Align the cursor to select the register number for the calculation programmeyou are going to create and press ENTER.[9] JUDGMENTProgram Jud.JD02= −−JD03= −−JD04= −−JD05= −−JD06= −−JD07= −−JD08= −−JD01= −−JD01=2. From the state shown in step 1 above, press ENTER again. A sub−window isdisplayed for selection of parameters to be input.NoteThis cannot be selected if no PA, CR, CH, SM, LD, GE, GW, CAor OCA, JR, JD checker data exists.3. Next, select the parameters to be referenced.JD01=CH0100Checker numbers cannot be selected if the checker does not exist.

Panasonic A230 User Manual