Panasonic A230 User Manual

Environment and Product Type OCR Type A2305 − 165.3 Product Types5.3.4 Set the Capture CameraSet the image capture camera for each type.Two cameras can be connected (camera A and camera B), so select from among thefollowing five possibilities.A: Capture images with camera A only (don’t capture with cameraB). Checkers set for camera B do not scan.B: Capture images with camera B only (don’t capture with cameraA). Checkers set for camera A do not scan.AB: Capture images with both cameras A and B simultaneously.AB Vertical: Camera A captures the left half of the image, and camera Bcaptures the right half, and the image is composed as a memory(camera) A image.Only the checkers set for camera A execute.AB Horizontal: Camera A captures the top half of the image, and camera Bcaptures the bottom half, and the image is composed as amemory (camera) A image.Only the checkers set for camera A execute.NotesIf you are only connecting one camera, connect it to theCamera A port. Capture errors may occur if you connect it tothe Camera B port.Only one internal synchronizing camera can be connected, soonly A can be selected.When the settings for the capture camera are changed, allsaved image data (including locked data) is erased.In the case that an external device switches the type set forthe capture camera to a different type, image capture is notperformed when the type is switched.Therefore, in the case that the display image of the changedtype is a memory image, after the type is switched, no imageis displayed until the next image is captured.