Panasonic A230 User Manual

Communications (Serial and Parallel) OCR Type A23016 − 3816.7 Char. Verif. − Character (pattern) Re−registration16.7.4 Character re−registration procedure and notesRe−registration using parallel inputProcedure:1. Specify the number of the Character Verification checker to performre−registration.2. Input the re−registration input signal (IN6) for the first time (the READY signalwill go off).3. If a position/rotation adjustment group has been specified, the specifiedPosition/Rotation Adjustment checker will scan and adjust the CharacterVerification checker.NoteIf the Position/Rotation Adjustment checker produces a NG result(due to being unable to detect an edge etc.), the re−registrationprocessing is cancelled, and the ERROR signal goes on.4. If a position/rotation adjustment group has been specified:Segmentation is performed at the adjusted position, and the checker patternand segmented character (pattern) are displayed.If the position/rotation adjustment group is “0”:Character (pattern) segmentation is done at the position set when the areawas created, and the checker pattern and segmented character (pattern) aredisplayed.NoteIf the Character Verification checker could not perform character(pattern) segmentation, the re−registration processing iscancelled, and the ERROR signal goes on.5. Input the re−registration input signal (IN6) for the second time.6. Re−registration will be performed and the READY signal will go on when it iscomplete.