Panasonic A230 User Manual

Communications (Serial and Parallel)OCR Type A23016 − 2916.5 Product Type Switching16.5 Product Type SwitchingThe following explanation tells you how to switch product types using externalequipment.16.5.1 Items related to serial/parallel communicationsInput Parallel SerialItemInputoroutputDetails I/O terminal Ref.page Command Ref.pageSwitchInputProduct type switchnumber specification+ switch timingIN1 to 5+TYPE 16 − 31 %X?? CR(??=01 to 32) 16 − 29Switchproduct typeOutput Switching completeConfirmation by off toon transition of theRDY (READY) signal.16 − 31 %Y?? CR(??=01 to 32) 16 − 2916.5.2 Common setting items for serial and parallel[4] ENVIRONMENT44. Parallel Output42. RS232C43. Serial Output4. Communication41. Com. Mode Normal Mode45. Type Switch Min. 0 msSet the following item.45. Type Switch Min. (0 to 100ms in 10ms steps)With this item you can set the minimum switching time for switching theproduct type (for both serial and parallel communications). Set this whenproduct switching cannot be detected by the external equipment due to thefact that the product switching time is very short. The factory setting is 0ms.For example:Setting value = 0: READY signal off time = switching timeSetting value switching time: READY signal off time = switching timeSetting value > switching time: READY signal off time = setting valueEx. Setting value Switch time READY signal OFF time1 0ms 20ms 20ms2 10ms 20ms 20ms3 50ms 20ms 50ms>