Useful FunctionsOCR Type A23015 − 315.1 Loading and Saving Image Data15.1 Loading and Saving Image DataImage data from an image captured by a camera can be saved in memory. Up to 8screens can be saved. However, image data is only saved while the power is on, so alldata will be lost if the power is cut. A saved image can be reloaded and displayed. Youcan also set and run a checker on a loaded screen (in−memory screen).1015.1.1 Load Image DataCall up saved images. When image data is loaded, 8 screens are displayed.Move the cursor over to load the desired image.[10] IMAGE DATAA:−−−−−−−− B:−−−−−−−− C:Esc.1Scan Times: 0CA30: 0CA31: 0CA32: 02 3 4 5 6L 7 8(1) Image reduction display area.(2) Displays the current image.(3) Shows the index number of the image. The smaller the number, theolder the image.(4) This “L” marking will appear if the lock is set on the image.(5) Shows the number of scans when the highlighted image was saved.(Will not be displayed when the cursor is highlighting the current image.)(6) Shows the numerical calculation result CA30 when the highlightedimage was saved. (Will not be displayed when the cursor is highlightingthe current image.)