Panasonic A230 User Manual

Character Verification Checker OCR Type A2308 − 88.3 Register the Reference Character Image (Checker Setting)8.3 Register the Reference Character Image (CheckerSetting)In order to perform character inspection you must first segment, extract and register thecharacter to be used as the reference for the inspection. Set the inspection range andsegmentation conditions and execute the segmentation.A:Regist. B:−−−−−−−−−− C:Esc.[2] CHAR. VERIF. Regist. Num. : 2No. 1 Character2. Checker Setting22. Segmentaton Color Black25. Noise Reduction 823. Segment. Area Min. 1621. Area ( 47, 338)−( 146, 417)24. Background Process Low26. Smart Setting No27. Registered ImageProcedure:1. Select Area from the menu, and specify the segmentationrange by enclosing it in a rectangular marquee.Refer to 4.11 Checker Area Setting Method for detailsregarding area specification.Note, however, depending of the setting value that you use instep 4 (Background Process), the range that can bespecified for the Area will change.Refer to Depending on the setting used for Background(page 8 − 12) for details.2. Select Segmentation Color, and select either White (light)or Black (dark) for the character to be segmented.3. Set a value for Segment. Area Min. to prevent small marks(dirt etc.) from being segmented. Marks smaller than thissetting will be ignored.