67C3K11 5-20123456789Removing the power unit1. Disconnect the start-in-gear protectioncable. (M and W model)Disconnect the battery cables 1. (E andW model)2. Disconnect the PTT motor leads 2. (PTTmodel)Disconnect the PTT switch coupler 3and trim sensor coupler 4. (R modelwith PTT)3. Disconnect the engine shut-off switchleads 5 and warning indicator assemblycoupler 6. (M model)Disconnect the warning indicator assem-bly coupler 6 and 10-pin main harness7 from the power unit. (E and W model)È M modelÉ E and W model4. Disconnect the flushing hose 8, coolingwater hose 9, and fuel hose 0.5. Disconnect the throttle cable and shiftcable.6. Remove the clip A, and then disconnectthe shift link rod B.S67C50441S67C5045423S67C516356ÈS67C516476ÉS67C50469 8 0S67C5165BAPower unit
