67C3K11 1-16123456789NOTE:Center the shift arm 5 in its free play c andthe shift cable 6 in its free play d, and thenconnect the shift cable.Checking the gear shift and throttleoperation1. Check that the throttle operates smoothlywhen the throttle grip is turned from thefully closed position to the fully openposition a. (H model)Check that the throttle operates smoothlywhen the remote control lever is shiftedfrom the F position or R position to thefully open position a. (R model)2. Check that the gear shift operatessmoothly when the shift lever or remotecontrol lever is shifted from the N positionto the F position or R position.È H modelÉ R modelNOTE:• The shift lever cannot be operated unlessthe throttle grip is in the fully closed posi-tion. (H model)• The resistance of the throttle grip (H model)or remote control lever (R model) can beadjusted using the throttle friction adjuster1.3. Set the shift lever to the F position or Rposition, and then check that the starterhandle cannot be pulled. If the starterrope can be pulled out normally, adjustthe start-in-gear protection cable. (M andW model)NOTE:To adjust the start-in-gear protection cable,see “Checking the start-in-gear protection (Mand W model)” (3-10).S67C1024a1F RNÈS6AU1024FNRaa1ÉS67C1027FRNFRNPredelivery check
