POWR Power unit5-25 67C3K115. Align the notch c in the drive sprocketwith the “ ” mark d on the cylinderblock.6. Install the timing belt 8 onto the drivesprocket, and then install it onto thedriven sprocket so that the part numbere on the belt is in the upright position.CAUTION:• Do not twist, turn inside out, or bend thetiming belt beyond the maximum limit of25 mm (1.0 in), otherwise it can be dam-aged.• Do not get oil or grease on the timingbelt.7. Turn the drive sprocket clockwise 2turns, and then check that the parts arealigned at the areas f and g as shown.8. Install the stator assembly, springwasher, and flywheel magnet.NOTE:See “Replacing the timing belt” (5-3).S67C5063dcXXXXXXS67C50648eS67C5065fgT R..Flywheel magnet nut:157 N·m (15.7 kgf·m, 115.8 ft·lb)
