SPEC Specification2-5 67C3K11Ignition control system CDI (micro computer)Advanced type Micro computerIgnition timingat 850 r/min Degree ATDC 5 ± 2Maximum generator output V, A 12, 15.0Spark plug DPR6EA-9 (NGK)Cooling system WaterExhaust system Propeller bossLubrication system Wet sumpFuel and oilFuel type Regular unleaded gasolineEngine oil type 4-stroke motor oilEngine oil grade (*1) API SE, SF, SG, SH, SJ, or SLSAE 5W-30, 10W-30, or 10W-40Engine oil quantity(without oil filterreplacement)L (US qt,Imp qt)2.0 (2.11, 1.76)(with oil filter replacement) L (US qt,Imp qt)2.2 (2.33, 1.94)Gear oil type Hypoid gear oilGear oil grade (*2) API GL-4SAE 90Gear oil quantity cm 3 (US oz,Imp oz)430 (14.54, 15.17)Bracket unitTrim angle(at 12° boat transom)Degree –4 to 20Tilt-up angle Degree 66Steering angle Degree 40 + 40PTT systemFluid type ATF Dexron IIDrive unitGear shift positions F-N-RGear ratio 2.00 (26/13)Reduction gear type Spiral bevel gearClutch type Dog clutchPropeller shaft type SplinePropeller direction (rear view) ClockwisePropeller mark G(*1) If the recommended engine oil grades are not available, use engine oil with an API classification of SH, SJ,or SL and an SAE classification of 15W-40, 20W-40, or 20W-50.(*2) Meeting both API and SAE requirementsItem Unit ModelF30AEHT F30AET F40BWHT F40BET
