67C3K11 8-6123456789É Position the warning indicator coupler betweenthe engine start switch and the engine shut-offswitch, making sure that it is vertical. (E and Wmodel)Ê Bend the 10-pin main harness as shown in theillustration, and then connect the harnesscoupler. The bend should be 10 mm (0.39 in)or more from the coupler and have a bendradius of 10 mm (0.39 in) or more. (E and Wmodel)Ë Route the PTT switch lead above the warningbuzzer as shown. (PTT model)Ì Route the neutral switch lead below thewarning buzzer as shown. (E and W model)Í Fasten the PTT switch lead with the holder.(PTT model)Î Be careful not to pinch the PTT switch leadbetween the steering handle and the bushing.(PTT model)S67C8008B-BACÈËÌ 385É67221B BÍÊÎAC--,+.44Electrical component and wiring harness routing
