SPEC Specification2-11 67C3K11Lower unitFuel pumpFuel pump holding pressureFuel inlet positive pressure kPa(kgf/cm2 , psi)50 (0.5, 7.3)Fuel inlet negative pressure kPa(kgf/cm2 , psi)30 (0.3, 4.4)Fuel outlet positive pressure kPa(kgf/cm2 , psi)50 (0.5, 7.3)Fuel joint holding pressurePositive pressure kPa(kgf/cm2 , psi)50 (0.5, 7.3)Fuel filter assembly holdingpressurePositive pressure kPa(kgf/cm2 , psi)1,035 (10.35, 150.1)Item Unit ModelF30AMHD F40BMHD F40BWHD F40BEDLower unitHolding pressure kPa(kgf/cm2 , psi)100 (1.0, 14.5)Gear backlashPinion-to-forward gear (*1) mm (in) 0.18–0.57 (0.0071–0.0224)Pinion-to-reverse gear (*1) mm (in) 0.75–1.13 (0.0295–0.0445)Pinion shims mm 0.10, 0.12, 0.15, 0.18, 0.30, 0.40, 0.50Forward gear shims mm 0.10, 0.12, 0.15, 0.18, 0.30, 0.40, 0.50Reverse gear shims mm 0.10, 0.12, 0.15, 0.18, 0.30, 0.40, 0.50Propeller shaftRunout limit mm (in) 0.02 (0.0008)Drive shaftRunout limit mm (in) 0.5 (0.0197)(*1) Figures obtained using the special service tools.Item Unit ModelF30AMHD F40BMHD F40BWHD F40BED
