SPEC Specification2-13 67C3K11Fuel control systemPrime Start resistance(*1)(Y – Y)at 20 °C (68 °F) Ω 20.0–23.0Prime Start plunger length(*1) mm (in) 10.7 (0.42)Starting systemPower bobbin output peakvoltage (Y/B – Y/B)at cranking (loaded) V 7.0at 1,500 r/min (loaded) V 28.0at 3,500 r/min (loaded) V 77.7Power bobbin resistance(*2)(Y/B – Y/B)at 20 °C (68 °F) Ω 6.5–7.2Starter motorType — BendixOutput kW — 1.20Cranking time limit Second — 30BrushesWear limit mm (in) — 6.4 (0.25)CommutatorUndercut wear limit mm (in) — 0.8 (0.03)Charging systemFuse A — 20Lighting coil output peakvoltage (Y – Y)at cranking (unloaded) V 14.1 8.4at 1,500 r/min (unloaded) V 39.7 28.5at 3,500 r/min (unloaded) V 95.2 66.6Lighting coil resistance(*2)(Y – Y)at 20 °C (68 °F) Ω 0.90–1.10 0.26–0.28Rectifier Regulator outputpeak voltage (R – Ground)at 1,500 r/min (loaded) V — 13at 3,500 r/min (loaded) V — 13(*1) The following resistance is when the ambient temperature is 20 °C (68 °F) and there is no power supplied.The figures are for reference only.(*2) The figures are for reference only.Item Unit ModelF30AMHD F40BMHD F40BWHD F40BED
