BRKT Bracket unit7-7 67C3K114. Install the throttle friction adjuster 7, andthen install a new cotter pin 8.5. Install the bushing 9, throttle grip 0,and PTT switch A (PTT model).NOTE:Fasten the PTT switch lead B with the hold-ers e. (PTT model)6. Install the throttle cable holder C andshift cable holder D as shown.7. Install the tiller handle assembly to thesteering arm, and then tighten the nuts tothe specified torque.8. Connect the throttle cable and shiftcable.NOTE:To adjust the throttle cable and shift cable,see “Adjusting the throttle cable” (3-8) and“Checking the gear shift operation” (3-9).9. Connect the engine shut-off switch leads(M model), or 10-pin main harness andwarning indicator assembly coupler (Eand W model).S67C700687S67C7007LT242A09S67C7113eBT R..Tiller handle nut:37 N·m (3.7 kgf·m, 27.3 ft·lb)S67C7114DC
