Icom IC-7100 manuals
IC-7100
Table of contents
- explicit definitions
- supplied accessories
- 1 Section PANEL DESCRIPTION
- Table Of Contents
- Controller — Front panel
- Controller — Function display
- Controller — Multi-function keys
- D Function keys on M-3 display
- D Function keys on D-1 display
- Controller — Rear and bottom panels
- Main unit — Front panel
- D ACC socket information
- D DATA2 socket information
- Microphone
- D HM-151 (Option)
- 2 Section INSTALLATION AND CONNECTIONS
- Table Of Contents
- antenna connection
- the main unit installation
- Required Connections to Transceiver
- connecting the ps-126 power supply
- connecting the ic-pw1/euro
- 3 Section 3 Section BASIC OPERATION BASIC OPERATION
- Table Of Contents
- before first applying power
- d vfo equalization
- d using the band stacking registers
- tuning with the dial
- d quick tuning function
- d selecting 1 hz step
- d auto tuning step function
- direct frequency input
- d band edge warning beep
- d programming the user band edge
- tuning on the mode announcement
- Basic transmit operation
- d microphone gain adjustment
- section 4 d-star introduction
- making a local area call
- making a gateway call
- using the rx history
- section 2 installation and connections
IC-7100
Table of contents
- Default
- MEMORY WRITE KEY [MW] (p
- d acc socket information
- d data2 socket information
- the main unit installation
- 3 Section BASIC OPERATION
- Table Of Contents
- before first applying power
- d vfo equalization
- d using the band stacking registers
- tuning with the dial
- d quick tuning function
- d selecting 1 hz step
- d auto tuning step function
- direct frequency input
- d band edge warning beep
- d programming the user band edge
- tuning off the s-meter announcement
- d microphone gain adjustment
- 4 Section RECEIVE AND TRANSMIT
- Table Of Contents
- Preamp and attenuator
- d about the cw reverse mode
- d cw sidetone function
- d memory keyer menu construction
- d memory keyer send menu
- d editing a memory keyer
- d contest number set mode
- d keyer set mode
- paddle polarity
- twin peak filter
- rtty set mode
- d rtty decoder
- rtty decode set mode
- transmitting an rtty memory
- editing an rtty memory
- rtty decode log set mode
- d repeater access tone frequency setting
- d transmit frequency monitor check
- d storing a non standard repeater
- D Preamplifier
- AGC function
- RIT function
- Twin PBT operation
- IF filter selection
- d auto notch function
- d manual notch function
- 6 Section FUNCTIONS FOR TRANSMIT
- Table Of Contents
- d using the vox function
- semi break-in operation
- full break-in operation
- direct frequency shift input
- d split lock function
- d split frequency offset setting
- d spot measurement
- d plot measurement
- swr graph set mode
- d programming a dtmf code
- transmitting dtmf code
- transmitting dtmf code (direct input)
- setting dtmf transfer speed
- making a local area call
- making a gateway call
- d tx message programming
- d adjusting the emr af level
- speech language selection
- speech speed selection
- the digital call sign squelch setting
- d repeater list contents
- new repeater programming
- individual skip setting
- 10 Section GPS/GPS-A OPERATION
- Table Of Contents
- displaying position data
- about the grid locator
- saving your own or received position data
- gps memory
- gps group name programming
- clearing a gps data
- moving a gps data
- gps alarm setting
- gps/gps-a operation
- d gps message programming
- operating gps-a
- setting gps-a
- setting the gps automatic transmission
- d memory channel contents
- copying in the memory mode
- scan speed
- rewind while playing
- auto monitor
- before operating
- rec start
- standby beep
- monitor level
- auto repeater
- voice 1st menu
- ref adjust
- vsend select
- display contrast
- voice tx name display
- auto power off
- all reset
- 19 Section MAINTENANCE
- Table Of Contents
- d circuitry fuse replacement
- d partial reset
- cloning between transceivers using a mini plug cable
- cloning using a cloning software
- initial setup using an sd card
- d transceiver power
- while operating d-star
- Table Of Contents
- d data format
- control command
- d data content description
IC-7100
Table of contents
- explicit definitions
- supplied accessories
- Table Of Contents
- Operating SSB
- Operating CW
- D About the CW reverse mode
- D CW sidetone function
- Electronic keyer functions
- D Memory keyer send menu
- D Editing a memory keyer
- D Contest number Set mode
- D Keyer Set mode
- Operating RTTY (FSK)
- The functions for RTTY operation
- D RTTY decoder
- D RTTY decode Set mode
- D Transmitting an RTTY memory
- D Editing an RTTY memory
- D Turning ON the RTTY decode log
- D RTTY decode log Set mode
- Operating AM/FM
- Tone squelch operation
- DTCS operation
- Tone scan/DTCS code scan operation
- Repeater operation
- D Repeater access tone frequency setting
- D One-touch repeater function
- D Transmit frequency monitor check
- D Storing a non standard repeater
- preamp and attenuator
- agc function
- rit function
- twin pbt operation
- noise blanker
- noise reduction
- notch function
- lock function
- meter peak hold function
- simple band scope
- vox function
- monitor function
- split frequency operation
- quick split function
- measuring swr
- dtmf memory encoder
- general description
- selecting a memory channel
- selecting a call channel
- programming a memory channel
- clearing a memory channel
- copying memory contents
- memo pad function
- scan types
- scan set mode
- voice squelch control function
- about the sd card
- inserting the sd card
- removing the sd card
- updating the repeater list
- recording a qso audio
- changing the recording mode
- playing back the recorded audio
- operation while playing back
- changing the skip time
- recording the voice audio
- transmitting the recorded voice audio
- set mode description
- display set mode
- others set mode
manualsdatabase
Your AI-powered manual search engine