ABB OmniCore IRB 6720 Product Manual

1.2.2 Safety symbols on manipulator labelsIntroduction to symbolsThis section describes safety symbols used on labels (stickers) on the manipulator.Symbols are used in combinations on the labels, describing each specific warning.The descriptions in this section are generic, the labels can contain additionalinformation such as values.NoteThe symbols on the labels on the product must be observed. Additional symbolsadded by the integrator must also be observed.Types of symbolsBoth the manipulator and the controller are marked with symbols, containingimportant information about the product. This is important for all personnel handlingthe robot, for example during installation, service, or operation.The safety labels are language independent, they only use graphics. See Symbolson safety labels on page 19.The information labels can contain information in text.Symbols on safety labelsDescriptionSymbolWarning!xx0900000812Warns that an accident may occur if the instructions are notfollowed that can lead to serious injury, possibly fatal, and/orgreat damage to the product. It applies to warnings that applyto danger with, for example, contact with high voltage electricalunits, explosion or fire risk, risk of poisonous gases, risk ofcrushing, impact, fall from height, etc.Caution!xx0900000811Warns that an accident may occur if the instructions are notfollowed that can result in injury and/or damage to the product.It also applies to warnings of risks that include burns, eye injury,skin injury, hearing damage, crushing or slipping, tripping, im-pact, fall from height, etc. Furthermore, it applies to warningsthat include function requirements when fitting and removingequipment where there is a risk of damaging the product orcausing a breakdown.Prohibitionxx0900000839Used in combinations with other symbols.Continues on next pageProduct manual - IRB 6720 193HAC085697-001 Revision: C© Copyright 2023 ABB. All rights reserved.1 Safety1.2.2 Safety symbols on manipulator labels