Chapter 1717-170IFAX-LIM Limiting the number of output lines when a large amount of data has beenreceived by IFAX.20: No limit0 to 999 [Default: 500]THICK-PR Use it to set the potential control mechanism for thick paper mode.20: use value determined by potential control in plain paper mode (default)1: use value determined by potential control in transparency modeTEMP-TBL Use it to select a fixing temperature.20: 198 deg C (default)1: 203 deg C2: 193 deg C3: 188 deg C4: 183 deg CDRM-H-SW Use it to set the night drum heater OFF mode.20: night drum heater ON (default)1: monitor ambient humidity every 2 hr; turn off drum heater if absolute watercontent is 9 g or lessDEV-IDLR Use it to set black band developing forced idle rotation mode used at time ofpower-on.20: execute black band developing idle rotation sequence at power-on if 2000copies or more were made on previous day and, in addition, absolute watercontent is 16 g or more (default)1: execute black band developing idle rotation sequence at power-on at alltimesBK-BD-1 Use it to set black band monthly remedial mode (for January).20: do not execute if absolute water content is less than 9 gexecute every 200 copies if absolute water content is 9 g or more (default)1: execute black band sequence every 60 copies2: execute black band sequence every 20 copies3: execute black band sequence every 6 copiesBK-BD-2 Use it to set black band monthly remedial mode (for February).2Same as for January.BK-BD-3 Use it to set black band monthly remedial mode (for March).2Same as for January.BK-BD-4 Use it to set black band monthly remedial mode (for April).2Same as for January.BK-BD-5 Use it to set black band monthly remedial mode (for May).2Same as for January.BK-BD-6 Use it to set black band monthly remedial mode (for June).2Same as for January.BK-BD-7 Use it to set black band monthly remedial mode (for July).2Same as for January.BK-BD-8 Use it to set black band monthly remedial mode (for August).2Same as for January.BK-BD-9 Use it to set black band monthly remedial mode (for September).2Same as for January.BK-BD-10 Use it to set black band monthly remedial mode (for October).2Same as for January.BK-BD-11 Use it to set black band monthly remedial mode (for November).2Same as for January.COPIER > OPTION > BODYSub-item Description Level
