Chapter 1010-33F-10-952) After mounting the fixing cleaning belt, move the plunger [4] of thecleaning belt feeding solenoid into the direction of the arrow.F-10-96If you have replaced the cleaning belt, be sure to return the setting underCOPIER>COUNTER>MISC>FIX-WEB to '0' in service mode.10.5.11 Claw Jam Sensor10.5.11.1 Removing the Claw Jam Sensor0007-2926iR105i/iR105+ / iR90701) Remove the fixing assembly.2) Remove the 2 screws, and detach the lower separation claw assembly.3) Detach the claw jam sensor [1] from the right side of the lowerdelivery assembly.F-10-9710.5.11.2 Removing the Delivery Speed Switching Clutch0008-8208/ iR85+ / iR80701) Slide out the fixing/feeder unit.2) Remove the fixing motor.3) Remove the 3 screws [1], and detach the fixing front support base [2].F-10-9810.5.12 External Delivery Sensor10.5.12.1 Remove the External Delivery Sensor0007-2928iR105i/iR105+ / iR90701) Remove the external delivery roller.2) Remove the 2 screws [1], and disconnect the connector [2]; then,detach the external sensor assembly [3].F-10-993) Disconnect the connector [1], and detach the external delivery sensor[2].F-10-10010.5.12.2 Remove the External Delivery Sensor0008-8210/ iR85+ / iR80701) Remove the external delivery roller.2) Remove the 2 screws [1], and disconnect the connector [2]; then,detach the external sensor assembly [3].Take up rollerCleaning beltfeeding roller[4][1][1][1][1][3][2][1][2]
