Chapter 1717-171BK-BD-12 Use it to set black band monthly remedial mode (for December).2Same as for January.SMTPTXPN Use it to change the number of the SMTP transmission port:20 to 65535 (in increments of 1)Default: 25After a change, be sure to re-boot the machine.SMTPRXPN Use it to change the number of the SMTP reception port.20 to 65535 (in increments of 1)Default: 25After a change, be sure to re-boot the machine.POP3PN Use it to change the number of the P0P3 reception port:20 to 65535 (in increments of 1)Default: 110After a change, be sure to re-boot the machine.RUI-DSP Setting whether to display a copy screen for RUI (Option switch conformingto the Disability Law)20: Do not display [Default]1: DisplayTRY-CHG Use it to change the control mechanism used to switch over trays when onebecomes full. 2STS-PORT Turning the TOT synchronous command communication port ON or OFFThe port for Inquiry/Response (synchronous) command communication inTUIF over TCP/IP is turned ON or OFF. 20: OFF [Default]1: ONCMD-PORT Turning the TOT asynchronous status communication port ON or OFFThe port for asynchronous status communication in TUIF over TCP/IP isturned ON or OFF. 20: OFF [Default]1: ONVBK-TBL changes the Vback environment control mechanism.20: default1: new Vback controlNS-CMD5 Limiting the use of CRAM-MD5 in SMTP authenticationThis is set to limit the use of CRAM-MD5 in SMTP authentication20: Dependent on the SMTP server [Default]1: Do not useNS-GSAPI Limiting the use of GSSAPI in SMTP authenticationThis is set to limit the use of GSSAPI in SMTP authentication.20: Dependent on the SMTP server [Default]1: Do not useNS-NTLM Limiting the use of NTLM in SMTP authenticationThis is set to limit the use of NTLM in SMTP authentication.20: Dependent on the SMTP server [Default]1: Do not useNS-PLNWS Limiting the use of PLAIN and LOGIN for SMTP authentication in anenvironment of communication packet encryptionThis is set to limit the use of PLAIN and LOGIN for SMTP authentication inan environment where communication packets are encrypted 20: Dependent on the SMTP server [Default]1: Do not useNS-PLN Limiting the use of PLAIN and LOGIN for SMTP authentication in anenvironmentThis is set to limit the use of PLAIN and LOGIN for SMTP authentication inan environment where communication packets are not encrypted. 20: Dependent on the SMTP server [Default]1: Do not useCOPIER > OPTION > BODYSub-item Description Level
