Chapter 1717-117T-17-151MMI Clearing the following settings in User mode- Backup data (user-defined values) of common settings- Various backup data (user-defined values), excluding faxThe settings are cleared when the main power switch is turned OFF and ON. 11) Select this item and press the OK key.2) Turn the main power switch OFF and ON.MN-CON Clearing RAM on the main controller circuit boardThe RAM is cleared when the main power switch is turned OFF and ON.11) Select COPIER>FUNCTION>MISC-P>P-PRINT to print the contents of theservice mode.2) Select this item and press the OK key.3) Turn the main power switch OFF and ON.4) Enter the P-PRINT output data as required.CARD Clearing the card ID (department) related dataThe card ID related data is cleared when the main power switch is turned OFF andON. 11) Select this item and press the OK key.2) Turn the main power switch OFF and ON.ALARM Clearing the alarm logThe alarm log is cleared when the main power switch is turned OFF and ON.11) Select this item and press the OK key.2) Turn the main power switch OFF and ON.SND-STUP Clearing the send-read settingsThe send-read settings are cleared when the main power switch is turned OFF andON. 21) Select this item and press the OK key.2) Turn the main power switch OFF and ON.CA-KEY Clearing the CA certificate and key pairThe CA certificate and key pair are cleared when the main power switch is turnedOFF and ON. 21) Select this item and press the OK key.2) Turn the main power switch OFF and ON.COPIER > FUNCTION > MISC-PSub-item Description LevelP-PRINT Printing out the service mode settings11) Select this item.2) Press the OK key to start printing.USER-PRT Printing out the user mode list11) Select this item.2) Press the OK key to start printing.LBL-PRNT Printing out the service label11) Load A4 or LTR paper on Cassette 1.2) Select this item.3) Press the OK key to start printing.PRE-EXP Checking the pre-exposure lamp (LED)11) Press this item to reverse its display.2) Press the OK key. After executing each operation for several seconds, themachine stops automatically. (All lit)3) Press the OK key to start printing.ReferenceIf the lighting of the pre-exposure lamp gives a problem to the photoconductordrum, rotate the drum.KEY-HIST Printing out the operating section key input history21) Select this item.2) Press the OK key to start printing.COPIER > FUNCTION > CLEARSub-item Description Level
