Chapter 1717-103T-17-119T-17-12017.5.1.2 Copier List0008-7965/ iR8070P-TR-EXP Use it to check the activation of the pre-transfer exposure lamp.21) Select the item, and press the OK key.- The pre-transfer exposure lamp goes ON.2) See that the pre-transfer exposure lamp remains ON for several seconds and goOFF automatically.CL-ADJ changes the timing at which the clutch goes on/off. 2COPIER > FUNCTION > SENS-ADJSub-item Description LevelOP-SENS Use it to adjust optical sensor.21) Check to make sure that paper is found in all paper cassettes.2) Select the item, and press the OK key.3) See that the machine indicates 'ACTIVE' during adjustment and 'OK'when the sensor is normal; otherwise, it will indicate 'NG'.COPIER > FUNCTION > SYSTEMSub-item Description LevelDOWNLOAD Switching to Download mode11) Select this item.2) Press the OK button to enter Download mode.CHK-TYPE Specifying a partition number for executing HD-CHECK and HD-CLEAR11) Select this item.2) Select a partition number with the ten-key pad.0: Entire HDD (*1, *2)1: Image accumulation area2: General-purpose file (user-defined data/various log data/PDL spool data/imagedata management information) storage area3: PDL-related file storage area4: Firmware storage area (*1, *2)5: MEAP area6: Address book area (*1)*1: Initialization in HD-CLEAR is not allowed.*2: Initialization in SST is possible.HD-CHECK Checking and restoring the partition specified by CHK-TYPE11) Select this item.2) Press the OK key.3) The result (1:OK, 2:NG (hardware), 3:NG (software) restored/alternative sector)is displayed.HD-CLEAR Initializing the partition specified by CHK-TYPE11) Select this item.2) Press the OK key.COPIER > FUNCTION > MISC-PSub-item Description Level
