Chapter 1717-4F-17-717.1.5 Entering or selecting service modes0008-7887iR105i/iR105+ / iR9070 / iR8070To execute a copier operation using a service mode, remove the cable from the external controller or the cable from the network before entering the desiredmode. Take care when using the FUNCTION (operation/inspection mode) mode, as the copier may malfunction and be damaged if a print job is receivedfrom outside while an operation is executing with this mode in effect.1) Press the asterisk key ( ) on the operation panel.2) Press 2 and 8 simultaneously on the numeric keypad.3) Press the asterisk key ( )on the operation panel.The initial screen (see below) now appears.F-17-817.1.6 Entering or selecting service modes0009-1480iR85+To execute a machine operation using a service mode, remove the cable from the external controller or the cable from the network before entering thedesired mode. Take care when using the FUNCTION (operation/inspection mode) mode, as the machine may malfunction and be damaged if a print jobis received from outside while an operation is executing with this mode in effect.1) Press the asterisk key ( ) on the operation panel.2) Press 2 and 8 simultaneously on the numeric keypad.3) Press the asterisk key ( )on the operation panel.The initial screen (see below) now appears.COPIERFEEDERSORTERBOARDAccessory board service modeADF service modeCopier service modeFinisher service modeOnly if installed.Only if installed.Only if installed.COPIERFEEDERSORTERSORTERADF service modesDisplayed only when the ADF is attached.Displayed only when the finisher is attached.BOARDOption board service modesDisplayed only when an option board isattached.Copier service modesSorter/finisher service modes(There are no modes for the sorter,so isn’t displayed evenwhen the sorter is attached.)
