Chapter 1414-64-SL101(Side paper deck)F-14-14514.8.19 Location of the Fixing Web Solenoid (SL2)0007-0632iR105i/iR105+ / iR9070a. If the Fixing Web Is NewUse the position of the solenoid [1] using the screw [2] so that the travelof the drive lever is 8.2 mm.F-14-146b. If the Fixing Web Is Not NewBefore removing the solenoid, check the position [A] of the drive leverwhen the solenoid [1] is ON. After replacing the solenoid, makeadjustments using the screw [2] so that the position of the drive lever isthe same (when the solenoid is ON).F-14-14714.8.20 Position of the Fixing Web Solenoid (SL2)0008-8388/ iR85+ / iR8070a. If the Fixing Web Is NewUse the screw [2] to adjust the position of the solenoid [1] so that thetravel of the drive lever is 8.2 mm.F-14-148b. If the Fixing Web Has Been in UseBefore removing the solenoid, take note of the position [A] of the drivelever when the solenoid [1] is ON; after replacement, adjust the positionof the drive lever using the screw [2] so that it is the same as it wasbefore removal when the solenoid goes on.F-14-14914.8.21 Position of the Delivery Flapper Solenoid(SL3)0007-0637iR105i/iR105+ / iR9070Use the screw [2] to adjust the position of the solenoid [1] so that thedrive lever is fully pushed when the solenoid is ON (i.e., when the steelcore is drawn).F-14-15014.8.22 Position of the Delivery Flapper Solenoid(SL3)0008-8389/ iR85+ / iR8070Use the screw [2] to adjust the position of the solenoid so that, when thesolenoid [1] goes on (i.e., when steel core is drawn), the drive lever isfully pushed.SL 101Side paper deckScrewsSolenoid(SL 101)8.2mm[1][2]A[1][2]8.2mm[1][2]A[1][2][1][2]Fully pushed.
