Chapter 22-41Go through the following steps only if Inch-configured paper is notgoing to be used.1) Press the releasing buttons of cassettes 3 and 4, and slide out thecassettes to remove the packing material.2) Set the side guide plate [1] of cassettes 3 and 4 into the hole (A4/A3)identified by the marking M.Fit the non-Inch tab [2] that comes with the machine into the holeidentified by the following marking, making sure that it will not bepushed up from inside the cassette:A:STMT-RH:LTR-RF-2-1732.2.31 Cassette0007-2402/ iR8070Go through the following steps only if Inch-configured paper is notgoing to be used.1) Press the releasing buttons of cassettes 3 and 4, and slide out thecassettes to remove the packing material.2) Set the side guide plate [1] of cassettes 3 and 4 into the hole (A4/A3)identified by the marking M.Fit the non-Inch tab [2] that comes with the machine into the holeidentified by the following marking, making sure that it will not bepushed up from inside the cassette:A:STMT-RH:LTR-RF-2-1742.2.32 Index Paper Attachment0007-6700iR105i/iR105+ / iR90701) Decide on either cassette 3 or 4 for use for index paper.Press the releasing button for the cassette, and slide it out to the front.Match the 2 one-touch supports [1] against the holes [2] in the cassette;then, push in the pins to fix them in place.2) Place the index paper attachment [3] by matching its holes against theone-touch supports [1].3) Fit the base sheet [6] in the cassette.Slid out the cassette.F-2-1752.2.33 Index Paper Attachment0007-3511/ iR85+1) Decide on either cassette 3 or 4 for use for index paper.Press the releasing button for the cassette, and slide it out to the front.Match the 2 one-touch supports [1] against the holes [2] in the cassette;then, push in the pins to fix them in place.2) Place the index paper attachment [3] by matching its holes against theone-touch supports [1].3) Fit the base sheet [6] in the cassette.Slid out the cassette.F-2-1762.2.34 Index Paper Attachment0007-2404/ iR80701) Decide on either cassette 3 or 4 for use for index paper.Press the releasing button for the cassette, and slide it out to the front.Match the 2 one-touch supports [1] against the holes [2] in the cassette;then, push in the pins to fix them in place.2) Place the index paper attachment [3] by matching its holes against theone-touch supports [1].3) Fit the base sheet [6] in the cassette.AH[2][1]AH[2][1][2][1][5][4][3][6][2][1][5][4][3][6]
