Chapter 55-29F-5-575.4.2.4 When Replacing the CCD Unit0008-4341iR105i/iR105+ / iR90701) Check to make sure that the Execution/Memory lamp in the controlpanel is OFF, and turn off the main power switch.2) Disconnect the power plug from the power outlet.The machine remains powered as long as the power plug is connected.Be sure to disconnect the power plug from the power outlet.3) Replace the CCD unit.4) Assemble the machine, and connect the power plug to the poweroutlet; then, turn on the main power switch.5) Execute the following in service mode in sequence:COPIER> FUNCTION> CCD> CCD-ADJCOPIER> FUNCTION> CCD> LUT-ADJ6) All items of the following will be updated; record them on the servicelabel: COPIER>ADJUST>CCD, COPIER> ADJUST> LAMP> L-DATA.7) Turn off and then on the main power switch.8) Make test copies in book mode and feeder mode to make sure that theimages are not displaced; if displaced, execute the following:Book ModeA: COPIER> ADJUST> ADJ-XY> ADJ-XB: COPIER> ADJUST> ADJ-XY> ADJ-YF-5-58Feeder ModeC: COPIER> ADJUST> ADJ-Y-DFF-5-599) Execute the following in service mode to print out a service label, andstore away the service label in the service book case.5.4.2.5 When Replacing the CCD Unit0008-81221) Check to make sure that the Execution/Memory lamp in the controlpanel is OFF, and turn off the main power switch.2) Disconnect the power plug from the power outlet.The machine remains powered as long as the power plug is connected.Be sure to disconnect the power plug from the power outlet.3) Replace the CCD unit.4) Assemble the machine, and connect the power plug to the poweroutlet; then, turn on the main power switch.5) Execute the following in service mode in sequence:1. COPIER>FUNCTION>CCD>CCD-ADJ2. COPIER>FUNCTION>CCD>LUT-ADJ6) All items of the following will be updated; record them on the servicelabel: COPIER>ADJUST>CCD>All Items,COPIER>ADJUST>LAMP>L-DATA.7) Turn off and then on the main power switch.8) Make test copies in book mode and feeder mode to make sure that theimages are not displaced; if displaced, execute the following:Book ModeA: COPIER>ADJUST>ADJ-XY>ADJ-XB: COPIER>ADJUST>ADJ-XY>ADJ-YF-5-60Feeder ModeC: COPIER>ADJUST>ADJ-Y-DFF-5-619) Execute the following in service mode to print out a service label, andstore away the service label in the service book case.5.4.2.6 When Replacing the CCD/AP Unit0008-8135/ iR8070Be sure to execute 'CCD auto adjustment' in service mode, and recordthe updated CCD adjustment data on the service label.1. CCD Auto AdjustmentCOPIER>FUNCTION>CCD>CCD-ADJ2. CCD Adjustment dataall items under[1] [1][3][5][2][4]BACBAC
