Chapter 1111-5111.5.41 Duplex Feed Fan11.5.41.1 Removing the Duplex Feed Fan (FM19)0007-3068iR105i/iR105+ / iR90701) Remove the duplex unit cover. (4 screws, 3 knobs)2) Disconnect the connector [1], and remove the 3 screws [2]; then,detect the duplex feed fan unit [3].At this time, keep in mind that the shift assembly [4] will also come off.F-11-1703) Remove the 2 screws [1], and detach the duplex feed fan [2].F-11-171When mounting the fan, be sure that the direction of air current is asindicated by the arrow.11.5.42 Separation Heat Discharge Fan11.5.42.1 Removing the Separation Heat Discharge Fan(FM20)0007-3069iR105i/iR105+ / iR90701) Remove the rear cover.2) Disconnect the connector, and remove the 2 screws [2]; then, detachthe separation heat discharge fan [3].F-11-17211.5.43 LCD Panel11.5.43.1 Removing the LCD Panel0007-3012iR105i/iR105+ / iR90701) Remove the control panel controller (CPU) PCB.2) Remove the control panel inverter PCB.3) Remove the W washer screw [1], and detach the grounding sheet [2].4) Remove the screw [3], and detach the LCD panel unit [4].F-11-1735) Remove the 4 screws [1], and detach the LCD panel [2].F-11-17411.5.43.2 Removing the LCD Panel0008-8589/ iR85+1) Remove the control panel lower cover.- Removing the Control Panel Case2) Remove heater 4 screws [1], and detach the control panel case [2].[3][4][2] [2][2][1][1][1][2][1][3] [2][2][1][2][3][3][3] [4][1][2][1]
