Chapter 99-73Take care not to trap your hand between the grip and the rail. Do notplace the duplexing unit where it is subjected to damage.9.10.20.2 Removing the Reversal Motor0008-8187/ iR85+ / iR80701) Remove the front cover of the duplexing unit.2) Disconnect he two connectors [1], and remove the four screws [2]then, detach the reversal motor[3] together with the motor supportplate [4].F-9-1733) Remove the four screws [1], and detach the reversal motor [2].F-9-1749.10.20.3 Removing the Reversal Motor0007-2870iR105i/iR105+ / iR90701) Remove the duplex feed fan unit.2) Loosen the screw [1]; then, while pulling the tension support plate [2]in the direction of the arrow, tighten the screw [1] (to loosen thetension of the belt [2]).3) Disconnect the connector [4], and remove the 2 screws [5]; then,detach the reversal motor [6].F-9-1759.10.20.4 Removing the Duplex Left Feed Motor0007-2871iR105i/iR105+ / iR9070 / iR85+ / iR80701) Remove the duplex feed fan unit.2) Loosen the screw [1]; then, while pulling the tension support plate [2]in the direction of the arrow, tighten the screw [1] (to loosen thetension of the belt [3]).3) Disconnect the connector [4], and remove the 2 screws [5]; then,detach the duplex left feed motor [6].F-9-1769.10.20.5 Removing the Lower Feed Motor0008-8188/ iR85+ / iR80701) Remove the duplexing unit front cover (four screws, three knobs).2) Disconnect the connector [1], and remove the two screws [2]; then,detach the lower feed motor [3].F-9-177[2] [2][4][2][3][2] [1][1] [1][2][2][1] [3] [6][5][5] [4][3] [1][6][5] [2] [4][2][3] [2] [1]
