Chapter 1717-136DATE-DSP Switching the date display format20: YYMM/DD1: DD/MM/YY2: MM/DD/YYMB-CCV Limiting the mailbox control card user20: No [Default]1: YesPR-D-SEL Use it to set the density of printing (PDL input).20 to 8 (4: default)0 (light) <=> 4 (standard) <=> 8 (dark)TRY-STP Setting output or no output in the tray full state20: Ordinary mode (Interrupt when the finisher tray is full) [Default]1: Interrupt by height detection onlyMF-LG-ST Setting the long mode key20: Ordinary [Default]1: Display a long mode key on the corresponding mode screenSPECK-DP Use it to enable/disable indication of a warning for dust detection instreamreading. 20: disable indication (default), 1: enable indicationCNT-DISP Setting whether or not to display a serial number when the counter confirmationkey is pressed20: Display a serial number [Default]1: Do not display a serial numberPH-D-SEL Setting the number of lines for printing in Photo mode20: 141 lines [Default]1: 134 linesNW-SCAN Enabling or disabling the network scan function20: Network scan function disabled [Default]1: Network scan function enabledMEMO:Not changeable for anything in JapanAlways 1 for PSPCL outside JapanChangeable for other outside JapanINS-C/S Use it to expand the inserter function.20: support cover only (default)1: support cover + interleaf (multi inserter)TBIC-RNK Use it to reduce uneven intervals.21 to 5 (default: 1)ORG-ODR Use it to set the sequence of reading double-sided original when originalorientation detection is enabled.20: read from back to face (default)1: read from face to backHDCR-DSP Setting whether or not display HDD clearance in User mode and changing thecontents of clearance21: Clear once with 0 [Default]2: Clear once with random data3: Clear three times with random dataBCK-CVR Use it to enable or disable the back cover mode function.20: disable back cover mode1: enable back cover modeJOB-INVL Setting the job interval at interrupt20: Output the next job continuously in interrupt copying (Standard) [Default]1: Start outputting the next job after the last paper of the interrupted copy job isoutput2: Start outputting the next job after the last paper of all jobs is outputCOPIER > OPTION >USERSub-item Description Level
