2-71Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command ReferenceOL-13271-03Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commandsclear dot1xclear dot1xUse the clear dot1x privileged EXEC command on the switch stack or on a standalone switch to clearIEEE 802.1x information for the switch or for the specified port.clear dot1x {all | interface interface-id}Syntax DescriptionDefaults No default is defined.Command Modes Privileged EXECCommand HistoryUsage Guidelines You can clear all the information by using the clear dot1x all command, or you can clear only theinformation for the specified interface by using the clear dot1x interface interface-id command.Examples This example shows how to clear all IEEE 8021.x information:Switch# clear dot1x allThis example shows how to clear IEEE 8021.x information for the specified interface:Switch# clear dot1x interface gigabithethernet1/0/1You can verify that the information was deleted by entering the show dot1x privileged EXEC command.Related Commandsall Clear all IEEE 802.1x information for the switch.interface interface-id Clear IEEE 802.1x information for the specified interface.Release Modification12.2(40)EX1 This command was introduced.Command Descriptionshow dot1x Displays IEEE 802.1x statistics, administrative status, and operationalstatus for the switch or for the specified port.
