C-12Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command ReferenceOL-13271-03Appendix C Cisco Catalyst Blade Switch 3130 and 3032 for Dell Show Platform Commandsshow platform ip multicastshow platform ip multicastUse the show platform ip multicast privileged EXEC command to display platform-dependent IPmulticast tables and other information.show platform ip multicast {acl-full-info | counters | groups | hardware [detail] | interfaces |locks | mdfs-routes | mroute-retry | retry | trace} [ | {begin | exclude | include} expression]Syntax DescriptionCommand Modes Privileged EXECCommand HistoryUsage Guidelines You should use this command only when you are working directly with a technical supportrepresentative while troubleshooting a problem. Do not use this command unless a technical supportrepresentative asks you to do so.Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain outputdo not appear, but the lines that contain Output appear.acl-full-info Display IP multicast routing access-control list (ACL) information, inparticular the number of outgoing VLANs for which router ACLs at theoutput cannot be applied in hardware.counters Display IP multicast counters and statistics.groups Display IP multicast routes per group.hardware [detail] Display IP multicast routes loaded into hardware. The optional detailkeyword is used to show port members in the destination index and routeindex.interfaces Display IP multicast interfaces.locks Display IP multicast destination-index locks.mdfs-routes Display multicast distributed fast switching (MDFS) IP multicast routes.mroute-retry Display the IP multicast route retry queue.retry Display the IP multicast routes in the retry queue.trace Display the IP multicast trace buffer.| begin (Optional) Display begins with the line that matches the expression.| exclude (Optional) Display excludes lines that match the expression.| include (Optional) Display includes lines that match the specified expression.expression Expression in the output to use as a reference point.Release Modification12.2(40)EX1 This command was introduced.
