C-26Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command ReferenceOL-13271-03Appendix C Cisco Catalyst Blade Switch 3130 and 3032 for Dell Show Platform Commandsshow platform pmshow platform pmUse the show platform pm privileged EXEC command to display platform-dependent port-managerinformation.show platform pm {counters | group-masks | idbs {active-idbs | deleted-idbs} | if-numbers |link-status | platform-block | port-info interface-id | stack-view | vlan {info | line-state}[ | {begin | exclude | include} expression]Syntax DescriptionCommand Modes Privileged EXECCommand HistoryUsage Guidelines You should use this command only when you are working directly with your technical supportrepresentative while troubleshooting a problem. Do not use this command unless your technical supportrepresentative asks you to do so.Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain outputdo not appear, but the lines that contain Output appear.counters Display module counters information.group-masks Display EtherChannel group masks information.idbs {active-idbs |deleted-idbs}Display interface data block (IDB) information. The keywords have thesemeanings:• active-idbs—Display active IDB information.• deleted-idbs—Display deleted and leaked IDB information.if-numbers Display interface numbers information.link-status Display local port link status information.platform-block Display platform port block information.port-info interface-id Display port administrative and operation fields for the specified interface.stack-view Display status information for the stack.This keyword is supported only on stacking-capable switches.vlan {info | line-state} Display platform VLAN information. The keywords have these meanings:• info—Display information for active VLANs.• line-state—Display line-state information.| begin (Optional) Display begins with the line that matches the expression.| exclude (Optional) Display excludes lines that match the expression.| include (Optional) Display includes lines that match the specified expression.expression Expression in the output to use as a reference point.Release Modification12.2(40)EX1 This command was introduced.
