2-537Cisco Catalyst Blade Switch 3120 for HP Command ReferenceOL-12248-03Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commandsshow ip dhcp snooping databaseshow ip dhcp snooping databaseUse the show ip dhcp snooping database user EXEC command to display the status of the DHCPsnooping binding database agent.show ip dhcp snooping database [detail] [ | {begin | exclude | include} expression]This command is supported only if your switch is running the IP services feature set.Syntax DescriptionCommand Modes User EXECCommand HistoryExamples This is an example of output from the show ip dhcp snooping database command:Switch> show ip dhcp snooping databaseAgent URL :Write delay Timer : 300 secondsAbort Timer : 300 secondsAgent Running : NoDelay Timer Expiry : Not RunningAbort Timer Expiry : Not RunningLast Succeded Time : NoneLast Failed Time : NoneLast Failed Reason : No failure recorded.Total Attempts : 0 Startup Failures : 0Successful Transfers : 0 Failed Transfers : 0Successful Reads : 0 Failed Reads : 0Successful Writes : 0 Failed Writes : 0Media Failures : 0detail (Optional) Display detailed status and statistics information.| begin (Optional) Display begins with the line that matches the expression.| exclude (Optional) Display excludes lines that match the expression.| include (Optional) Display includes lines that match the specified expression.expression Expression in the output to use as a reference point.Release Modification12.2(40)EX1 This command was introduced.
