2-417Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command ReferenceOL-13271-03Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commandsremote commandremote commandUse the remote command privileged EXEC command to monitor all or specified stack members.remote command {all | stack-member-number} LINENote This command is supported only on stacking-capable switches.Syntax DescriptionCommand Modes Privileged EXECCommand HistoryUsage Guidelines The commands (such as debug, show, or clear) you use in the LINE command-to-execute string applyto a specific stack member or to the switch stack.Examples This example shows how to execute the undebug command on the switch stack:Switch(config)# remote command all undebug allSwitch :1 :------------All possible debugging has been turned offSwitch :5 :------------All possible debugging has been turned offSwitch :9 :------------All possible debugging has been turned offThis example shows how to execute the debug udld event command on stack member 5:Switch(config)# remote command 5 undebug allSwitch :5 :------------UDLD events debugging is onall Apply to all stack members.stack-member-number Specify the stack member. The range is 1 to 9.LINE Specify the command to execute.Release Modification12.2(40)EX1 This command was introduced.
