2-613Cisco Catalyst Blade Switch 3120 for HP Command ReferenceOL-12248-03Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commandsshow mls qosshow mls qosUse the show mls qos user EXEC command to display global quality of service (QoS) configurationinformation.show mls qos [ | {begin | exclude | include} expression]Syntax DescriptionCommand Modes User EXECCommand HistoryUsage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain outputdo not appear, but the lines that contain Output appear.Examples This is an example of output from the show mls qos command when QoS is enabled and DifferentiatedServices Code Point (DSCP) transparency is disabled:Switch> show mls qosQoS is enabledQoS ip packet dscp rewrite is disabledThis is an example of output from the show mls qos command when QoS is enabled and DSCPtransparency is enabled:Switch> show mls qosQoS is enabledQoS ip packet dscp rewrite is enabledRelated Commands| begin (Optional) Display begins with the line that matches the expression.| exclude (Optional) Display excludes lines that match the expression.| include (Optional) Display includes lines that match the specified expression.expression Expression in the output to use as a reference point.Release Modification12.2(40)EX1 This command was introduced.Command Descriptionmls qos Enables QoS for the entire switch.
