2-638Cisco Catalyst Blade Switch 3120 for HP Command ReferenceOL-12248-03Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commandsshow nmspshow nmspUse the show nmsp privileged EXEC command to display the Network Mobility Services Protocol(NMSP) information for the switch. This command is available only when your switch is running thecryptographic (encrypted) software image.show nmsp {attachment suppress interface | capability | notification interval | statistics{connection | summary} | status | subscription {detail | summary}} [ | {begin | exclude |include} expression]Syntax DescriptionCommand Modes Privileged EXECCommand HistoryExamples This is an example of output from the show nmsp attachment suppress interface command:Switch# show nmsp attachment suppress interfaceNMSP Attachment Suppression Interfaces--------------------------------------GigabitEthernet1/1GigabitEthernet1/2attachment suppressinterfaceDisplay attachment suppress interfaces.capability Display switch capabilities including the supported services andsubservices.notification interval Display the notification intervals of the supported services.statistics {connection |summary}Display the NMSP statistics information.• connection—display the message counters on each connection.• summary—display the global counters.status Display information about the NMSP connections.subscription {detail |summary}Display the subscription information on each NMSP connection.• detail—display all services and subservices subscribed on eachconnection.• summary—display all services subscribed on each connection.| begin (Optional) Display begins with the line that matches the expression.| exclude (Optional) Display excludes lines that match the expression.| include (Optional) Display includes lines that match the specified expression.expression Expression in the output to use as a reference point.Release Modification12.2(50)SE This command was introduced.
