2-634Cisco Catalyst Blade Switch 3120 for HP Command ReferenceOL-12248-03Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commandsshow mvr membersshow mvr membersUse the show mvr members privileged EXEC command to display all receiver and source ports that arecurrently members of an IP multicast group.show mvr members [ip-address] [ | {begin | exclude | include} expression]Syntax DescriptionCommand Modes Privileged EXECCommand HistoryUsage Guidelines The show mvr members command applies to receiver and source ports. For MVR-compatible mode, allsource ports are members of all multicast groups.Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain outputdo not appear, but the lines that contain Output appear.Examples This is an example of output from the show mvr members command:Switch# show mvr membersMVR Group IP Status Members------------ ------ -------239.255.0.1 ACTIVE Gi1/0/1(d), Gi1/0/5(s)239.255.0.2 INACTIVE None239.255.0.3 INACTIVE None239.255.0.4 INACTIVE None239.255.0.5 INACTIVE None239.255.0.6 INACTIVE None239.255.0.7 INACTIVE None239.255.0.8 INACTIVE None239.255.0.9 INACTIVE None239.255.0.10 INACTIVE None truncated>ip-address (Optional) The IP multicast address. If the address is entered, all receiver andsource ports that are members of the multicast group appear. If no address isentered, all members of all Multicast VLAN Registration (MVR) groups arelisted. If a group has no members, the group is listed as Inactive.| begin (Optional) Display begins with the line that matches the expression.| exclude (Optional) Display excludes lines that match the expression.| include (Optional) Display includes lines that match the specified expression.expression Expression in the output to use as a reference point.Release Modification12.2(40)EX1 This command was introduced.
