2-590Cisco Catalyst Blade Switch 3120 for HP Command ReferenceOL-12248-03Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commandsshow mac access-groupshow mac access-groupUse the show mac access-group user EXEC command to display the MAC access control lists (ACLs)configured for an interface or a switch.show mac access-group [interface interface-id] [ | {begin | exclude | include} expression]Syntax DescriptionCommand Modes User EXECCommand HistoryUsage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain outputdo not appear, but the lines that contain Output appear.Examples This is an example of output from the show mac-access group user EXEC command. In this display,port 2 has the MAC access list macl_e1 applied; no MAC ACLs are applied to other interfaces.Switch> show mac access-groupInterface GigabitEthernet1/0/1:Inbound access-list is not setInterface GigabitEthernet1/0/2:Inbound access-list is macl_e1Interface GigabitEthernet1/0/3:Inbound access-list is not setInterface GigabitEthernet1/0/4:Inbound access-list is not set truncated>This is an example of output from the show mac access-group interface gigabitethernet1/0/1command:Switch# show mac access-group interface gigabitethernet1/0/1Interface GigabitEthernet1/0/1:Inbound access-list is macl_e1interface interface-id (Optional) Display the MAC ACLs configured on a specific interface. Validinterfaces are physical ports and port channels; the port-channel range is 1to 64 (available only in privileged EXEC mode).| begin (Optional) Display begins with the line that matches the expression.| exclude (Optional) Display excludes lines that match the expression.| include (Optional) Display includes lines that match the specified expression.expression Expression in the output to use as a reference point.Release Modification12.2(40)EX1 This command was introduced.
