2-571Cisco Catalyst Blade Switch 3120 for HP Command ReferenceOL-12248-03Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commandsshow ipv6 route updatedshow ipv6 route updatedUse the show ipv6 route updated command in user EXEC command to display the current contents ofthe IPv6 routing table.show ipv6 route [protocol] updated [boot-up] {hh:mm | day{month [hh:mm]} [{hh:mm |day{month [hh:mm]}] [ | {begin | exclude | include} expression]Syntax DescriptionCommand Modes Privileged EXECCommand Historyprotocol (Optional) Displays routes for the specified routing protocol using any ofthese keywords:• bgp• isis• ospf• ripor displays routes for the specified type of route using any of these keywords:• connected• local• static• interface interface idboot-up Display the current contents of the IPv6 routing table.hh:mm Enter the time as a 2-digit number for a 24-hour clock. Make sure to use thecolons (:). For example, enter 13:32day Enter the day of the month. The range is from 1 to 31.month Enter the month in upper case or lower case letters. You can enter the fullname of the month, such as January or august, or the first three letters ofthe month, such as jan or Aug.| begin (Optional) Display begins with the line that matches the expression.| exclude (Optional) Display excludes lines that match the expression.| include (Optional) Display includes lines that match the specified expression.expression Expression in the output to use as a reference point.Release Modification12.2(40)EX1 This command was introduced.
