B-5Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command ReferenceOL-13271-03Appendix B Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commandsdebug cispdebug cispUse the debug cisp global configuration command to enable debugging message exchanges and eventson a Client Information Signalling Protocol (CISP)-enabled interface.Use the no form of this commandto disable debugging.debug cisp [all | errors | events | packets | sync]no debug cisp [initialization | interface-configuration | rpc]Syntax DescriptionDefaults Debugging is disabled.Command Modes Privileged EXECCommand HistoryRelated Commandsall Display all CISP debug messages.errors Display CISP debug messages.events Display CISP event debug messages.packets Display CISP packet debug messages.sync Display CISP operational synchronization debug messages.Release Modification12.2(50)SE This command was introduced.Command Descriptioncisp enable Enables Client Information Signalling Protocol (CISP)dot1x credentials(global configuration)profileConfigures a profile on a supplicant switch.show cisp Displays CISP information for a specified interface.
