2-86Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command ReferenceOL-13271-03Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commandsclear mac address-tableclear mac address-tableUse the clear mac address-table privileged EXEC command on the switch stack or on a standaloneswitch to delete from the MAC address table a specific dynamic address, all dynamic addresses on aparticular interface, all dynamic addresses on stack members, or all dynamic addresses on a particularVLAN. This command also clears the MAC address notification global counters.clear mac address-table {dynamic [address mac-addr | interface interface-id | vlan vlan-id] |notification}Syntax DescriptionDefaults No default is defined.Command Modes Privileged EXECCommand HistoryExamples This example shows how to remove a specific MAC address from the dynamic address table:Switch# clear mac address-table dynamic address 0008.0070.0007You can verify that the information was deleted by entering the show mac address-table privilegedEXEC command.Related Commandsdynamic Delete all dynamic MAC addresses.dynamic addressmac-addr(Optional) Delete the specified dynamic MAC address.dynamic interfaceinterface-id(Optional) Delete all dynamic MAC addresses on the specified physical portor port channel.dynamic vlan vlan-id (Optional) Delete all dynamic MAC addresses for the specified VLAN. Therange is 1 to 4094.notification Clear the notifications in the history table and reset the counters.Release Modification12.2(40)EX1 This command was introduced.Command Descriptionmac address-table notification Enables the MAC address notification feature.show mac address-table Displays the MAC address table static and dynamic entries.show mac address-table notification Displays the MAC address notification settings for allinterfaces or the specified interface.snmp trap mac-notification Enables the Simple Network Management Protocol (SNMP)MAC address notification trap on a specific interface.
